Egrep

OK I think I figured it out. Do a full scan... goto gateway... select installed tab. scroll down to find tpms. (in mine there were 2 tpms systems...tpms 2 and tpms1 I believe they are the passive tpms 2 system using the abs and the active system using sensors in the wheels. I have the second one tpms 1 with sensors in the wheels.) uncheck the check box for the tpms system you have. then hit save All done tpms is now removed. Once I get the new sensors I will re-enable it. Is good to turn off the light and disable the message etc, till you get it fixed.

Hi. In my V.W. CC 2009. The T.P.M.S system has an error and the light on dash comes on and it keeps coming up and flashing then solid. Did a scan and it says communications error. Checking online seems my batteries in the sensors inside the wheels have gone flat. Sensors need to be replaced. I want to disable the T.P.M.S system until I can get new sensors..They are expensive. In vag-com it is a simple matter of un-ticking a check box for T.P.M.S system. In carport there is no such thing and I will need to change the coding for the T.P.M.S .. But I can find no info anywhere as to where to get this info. Any help would be appreciated.

I too want some coding help (such as is available in vcds) I have the beta version but there is no such info. How do I get coding byte/bit info?? makes coding very hard indeed. Added the vcds lbl files in the beta version...as suggested. Still no coding help. in each byte/bit it just says no information. This makes it next to impossible to change anything if you do not know the hex or binary coding is there anyway to see what each bit is?