Climatronic retrofit

[-WP-]

Hi all,

 

I'm newbie here so please bare with me.

 

I recently retrofitted a 2nd-hand Climatronic panel to my 2008 VW Passat 3C. Reason for this retrofit was to have the Auxiliary heater activation button inside the car as I also replaced the non-working TT-V heater with 2nd-hand TT-Vevo unit

 

Mainly all works as it should but there is a few Faults in the system. First, when with the old Climatronic Panel the settings to temp/vents/etc. were left unchanged after restarting the car, now all settings are preset when I turn off ignition. New Aux.heater is also a Parking heater as the old one was not. Now I have the Aux.heater activation in MFD but there is also a problem it does not activate the Climatronic.

 

Here is attached the latest System Scan I performed.

 

I'd be most delighted if someone could help me out here.

21112014.pdf