Jump to content
CarPort ForumCarPort Forum


  • Posts

  • Joined

  • Last visited

  • Days Won


jens last won the day on May 15 2019

jens had the most liked content!

About jens

  • Birthday 01/01/1979

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

jens's Achievements


Newbie (1/14)



  1. No, it is not supported. For manufacturer specific (VAG) diagnostics with access to all control units, please use one of the following interfaces: AutoDia K509 K+CAN Commander 1.4 CP compact KKL-Interface (for K-Line only, no CAN-Bus support)
  2. On a modern computer (Core i5 with SSD) it takes less than a minute.
  3. An internet connection is not required. At this point of the installation it may take a few minutes, depending on your computer hardware. Did you wait a little longer?
  4. CarPort does currently not support wifi/bluetooth interfaces for manufacturer specific diagnostics.
  5. The Tiguan supports CAN-Bus diagnostics only. So you will need the Basic or Pro-Module CAN (software license) and a compatible interface (e.g. AutoDia K509, CP compact or K+CAN 1.4).
  6. We recommend getting a K+CAN Commander 1.4 which is available on ebay.com and works seamlessly with CarPort. Important: You need version 1.4. Other versions are not supported!
  7. You can purchase the CarPort Pro-Module KKL separately and activate it in addtition to your existing license. https://carport-diagnostics.com/en/order Please note that you will need at least a KKL-Interface (cable) to perform manufacturer specific diagnostics (with access to all control units) on your VW Touareg.
  8. Thanks for the feedback!
  9. Have you managed to activate the Hidden Menu (Green Screen)? If you have the instructions for VCDS you can easily adapt it to CarPort. Let us know which step is unclear or does not work as expected.
  10. If it is ELM327 compatible it will most likely work. You can simply try it out with the FREE Edition. However, this interface is not suited for manufacturer specific diagnostics on your Volkswagen, Audi, SEAT or Skoda.
  11. The Audi A4 B7 uses K-Line and CAN-Bus for communication. Your KKL Blue cable does not support CAN-Bus. You will need a different one, e.g. K+CAN Commander 1.4, AutoDia K509 or CP compact.
  12. There is a different license for OBD2 diagnostics (manufacturer independent diagnostics of exhaust relevant data and faults on address 33). The Basic-Module KKL ist for manufacturer specific diagnostics (access to all control units) via K-Line. Instead of trying to clear the faults via OBD2 diagnostics (address 33) you can connect to the engine control unit (address 01) directly via manufacturer specific diagnostics and clear the fault memory there. This will also clear the OBD2 fault memory.
  13. The difference is in the firmware. CarPort only supports K+CAN Commander 1.4. So you should buy this one. Regards Jens
  14. jens

    Purchase CarPort

    Yes, it comes with software and hardware. With this bundle you can read fault codes and measuring blocks on all VAG cars (VW, Audi, SEAT and Skoda).
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.